Kit Contents
GPIB-SCSI-A controller, specified power cord, NI-488.2M multitasking software for
Solaris, and SCSI cable
Computer/Bus | Sun SPARCstation SCSI |
Processor | SPARC |
Operating System | Solaris 1, Solaris 2 |
Overview
The GPIB-SPRC-S is an external IEEE 488 interface kit for the Sun SPARCstation
SCSI port. The GPIB-SCSI-A is a full-function IEEE 488.2 Controller that
interfaces 14 GPIB instruments to the SPARCstation from its external SCSI port.
The NI-488.2M software is compatible with National Instruments software for other
Sun workstations, so users upgrading do not have to alter their existing programs to use the GPIB-SPRC-S kit.
Hardware
GPIB-SCSI-A - The GPIB-SCSI-A can turn any computer with a SCSI port into
a GPIB controller. The GPIB-SCSI-A implements the full range of GPIB Controller
functions. It uses both normal and extended Talker and Listener, serial and
parallel poll, service request, pass and receive control, and remote programming
functions.
The GPIB-SCSI-A has a 256 KB RAM buffer. With this buffer, the SCSI bus is not tied up while the GPIB-SCSI-A communicates with GPIB devices. The GPIB-SCSI-A comes with an internal 100-120 VAC or 220-240 VAC power supply.
For more information about the GPIB-SCSI-A, refer to page 4-95.
Cable - The GPIB-SPRC-S kit includes a 1 m GPIB-SCSI-A (SCSI-1) to SPARCstation (Sun SCSI Micro D50) cable.
Driver Software
The following NI-488.2M software is included in the GPIB-SPRC-S kit:
* NI-488.2M for Solaris 1.x
* NI-488.2M for Solaris 2.x
Application Software
You can use the following application software packages with the GPIB-SPRC-Skit:
* LabVIEW
* LabWindows/CVI
Part Numbers
Hardware and Software Kit
GPIB-SPRC-S
U.S. 120 VAC 776584-01
Swiss 220 VAC 776584-02
Australian 240 VAC 776584-03
Universal Euro 240 VAC 776584-04
North American 240 VAC 776584-05
United Kingdom 240 VAC 776584-06